Electronic Rack eHandle User Manual
14
3.3 eHandle Lock Mounting Option for Front and Rear Door
3.3.1
If needed, remove any existing lock mechanism. Save the Cam (latch) for later steps.
NOTE: The eHandle’s lock requires a cut-out of 150x25mm. Reference Figure below for the following steps.
3.3.2
Position the lock body within the cut-out and flush to the outer face of the cabinet door. Use the 12mm Top
Mounting Screws and Top Mounting Bracket to secure the lock to the door.
3.3.3
Select a suitable Rotation Limiter (standard or extended) and mount the cam assembly from Step 1. Secure
using the included Cam Screw. Pay careful attention to the orientation of the Rotation Limiter according to
your installation requirements.
3.3.4
Ensure that the orientation of the lock plug corresponds to the orientation of the Bottom Mounting Bracket
and install the Bracket using the included 15mm and 20mm Bottom Mounting Screws.
