Functions of each type of Handles
P/N
eHandle Types
EH01
RFID Card Reader
‐
‐
‐
EH02
RFID Card+Keypad
Reader
‐
‐
‐
‐
EH03
Electronic only
eHandle
‐
‐
‐
EH04
Keypad only
eHandle
‐
‐
‐
‐
‐
2.2 eHandle Wiring Diagram
The wiring diagram below provides a visual illustration of the physical connections and physical layout of a
typical electronic rack eHandle system, demonstrating the interconnections between a
eHandle, a Panduit PDU, and relative sensors.
Description
eHandle RFID (125kHz /13.56MHz) with integral humidity sensor
Support Single factor RFID card authentication
Remote lock/unlock capability
eHandle RFID (125kHz /13.56MHz) and Keypad with
sensor
Support Dual Authentication
Remote lock/unlock capability
Need to provide an option in firmware to hide the pin with * when pin is
typed. This hidden pin mode can be enabled and disabled in firmware.
eHandle No Card Reader with integral humidity sensor
Remote lock/unlock capability
RF support to be disabled in factory firmware mode.
eHandle No Card Reader and Keypad with integral humidity sensor
Support User pin authentication
Physical key override
Remote lock/unlock capability
RF support to be disabled in factory firmware mode.
Wiring Diagram
The wiring diagram below provides a visual illustration of the physical connections and physical layout of a
system, demonstrating the interconnections between a
, a Panduit PDU, and relative sensors.
5
with integral humidity sensor
13.56MHz) and Keypad with integral humidity
Need to provide an option in firmware to hide the pin with * when pin is
typed. This hidden pin mode can be enabled and disabled in firmware.
tegral humidity sensor
RF support to be disabled in factory firmware mode.
integral humidity sensor.
RF support to be disabled in factory firmware mode.
The wiring diagram below provides a visual illustration of the physical connections and physical layout of a
system, demonstrating the interconnections between an electronic rack