Electronic Rack eHandle User Manual
8
4.2 Panel thickness range: 1mm to 2.5mm thick
4.3
Flat CAM Grip range: 15.5mm
4.4
The physical location of the center of the Driver Shaft must be central to the cutout, 25mm below the top of
the panel cutout.
4.5
Recommended mechanical interface between the Driver Shaft and the door locking mechanism
Driver Shaft Critical Dimensions
Cross sectional width:
7.9mm +0/-0.1
Cross sectional height:
7.9mm +0/-0.1
Shaft Protrusion Depth: 3.75mm
Central Thread:
M6 threaded hole >= 10mm deep
4.6
Grip Range with 2mm offset CAM: 17.5mm
4.7
Clearances behind the eHandle must not be any more restrictive than behind the existing Panduit ACE01,
ACE02 & ACE03 Swinghandles, as detailed below.
15.5mm restriction to extend from the top of the eHandle down to 36.21mm below the center line of the
driver shaft.
24mm restriction to extend onwards from the point 36.21mm below the center of the driver shaft.
