6
eHome
Instruction Manual
PENDIENTE DE V
ALIDACIÓN
1�- VERIFICATION UPON RECEPTION
Check the following points when you receive the device:
a) The device meets the specifications described in your order.
b) The device has not suffered any damage during transport.
c) Perform an external visual inspection of the device prior to switching it on.
d) Check that it has been delivered with the following:
- User manual,
- 1 Cable gland M25x1.5,
If any problem is noticed upon reception, immediately contact the transport
company and/or
CIRCUTOR’s
after-sales service.
2�- PRODUCT DESCRIPTION
The
eHome
charging system is specially designed to be easily installed both in outdoor and in-
door private car parks, in order to charge all the EV brands of the market in MODE 3 (according
to European standard IEC 61851-1), by just connecting either its tethered cable with a type 1
or type 2 connector.
The device features:
- Remote control input,
allows to start/stop the EV recharge by means of a dedicated
logic input.
- Plug & Play,
It is possible to start charging by just plugging the
eHome
connector into
the car.
- Current limitation,
by means of an on-board rotative DIP switch, the maximum current
delivered by the unit is setup.
-Status RGB LED bar,
It shows the status of the unit when it is either available or charg-
ing. Also some specific blinking error sequences are shown when there is a faulty oper
-
ation.
- Housing,
designed for outdoor and indoor operation.
