10
eHome
Instruction Manual
PENDIENTE DE V
ALIDACIÓN
MCB
: Its gauge must be chosen depending on the maximum output current of the
charging point.
For more information, see
5.- TECHNICAL FEATURES.
3�3�2�- POWER SUPPLY - LINE DIMENSIONING
The dimensioning of the device power supply line must be checked by a qualified electrician.
Note that various factors such as the cable length between the distribution board and the de-
vice, its maximum output current or ambient temperature may have influence of the selected
cable.
So, it is important to select the appropriate cable cross-section in agreement with the local reg-
ulations and the power supply cable type that it is used.
3�3�3�- CHARGING POINT MAXIMUM OUTPUT CURRENT
If the installed device power supply is less than the maximum output current of the charge
point, an adjustment to a lower nominal current must be performed using the on-board rotative
dipswitch.
Note:
Please refer to
4.5.- CURRENT LIMIT SELECTOR
section in order to know how to change
this value.
3.4.- OPENING THE DEVICE
1�-
Remove the screw at the bottom of the box.
Figure 2: Opening the device, Step 1�
2�-
Using a screw driver, put it into the indicated marks, at the bottom of the box, and start re-
moving the frame doing click at the bottom.
