Circutor AFQm, Instruction Manual, Page: 190 / 230

190
AFQm
Instruction Manual
ENGLISH
7.11.- ETHERNET COMMUNICATIONS
The Ethernet communication parameters are configured in this screen,
Figure 80
:
Figure 80: Configuration screen: Ethernet communications.
By activating the DHCP option , the device assigns the IP automatically.
If this option is not activated, the parameters must be configured manually:
●
IP Address, IP address.
● Netmask,
subnet mask.
●
Gateway, gateway.
Press the key to access the next configuration step
Press the key to access the main screen of the device without saving the configuration values.
7.12.- RS-485 COMMUNICATIONS
The RS-485 communications configuration in AFQm models is set to a Baud rate of 9600 bps, 8 data
bits, 1 stop bit and no parity. Only the device’s Modbus address can be configured,
Figure 30
.
Figure 81: Configuration screen: RS-485 communications.
● Modbus device,
modbus address.