Document: Service Manual
Description: Treadmill
Model: M7 E / M7L E
Page: 5 of 25
5
Step
illustrate
Auxiliary Photo
7
Do it can be calibrating normally or shows
LS on TIME window?
If calibrate normally and return to idle mode,
please check the SPEED parameter on
CALORIES window when calibrate speed at
max speed 20km/h (±0.1).
In normal condition, the SPEED parameter
shall be between 340~350.
8
If calibrate abnormal, open motor cover and
check speed sensor connected well.
If speed sensor connected well, please
replace the sensor and check again.
Refer to 2.3
『
Speed Sensor
』
If still shows error signal, have to check the
console wire, damage or connect terminal
problem.
If console wire check ok, please replace the
console wire then back to execute step 2,
check the error signal disappear or not.
Refer to 2.2
『
Console Wire
』
If still shows error signal after replace the
console wire, please replace the console
PCB then back to execute step 2, check the
error signal disappear or not.
Calibrate abnormal, show
【
LS
】
Calibrate normal, return to idle mode
Summary of Contents for M-7 SERIES E TYPE
Page 1: ......
