Document: Service Manual
Description: Treadmill
Model: M7 E / M7L E
Page: 21 of 25
21
3.
Engineering Mode
3.1.
Engineering Mode 1: Factory Settings
3.1.1.
To pull out the emergency stop key then press START and FAST simultaneously and
put the emergency key back, to leave you hand from keys till dot-matrix window
shows WELCOME.
3.1.2.
LED will do the scan mode after dot-matrix window show WELCOME, then dot-matrix
will shows
『
TM016 FACTORY SETTINGS PRESS ENTER
』
。
3.1.2.1.
Press ENTER to set UNIT: dot-matrix shows
『
UNITS ENGLISH
』
，
press Fast
、
Slow
、
Up or Down to change to
『
UNITS METRIC
』
。
UNITS ENGLISH: mile
、
LB.
UNITS METRIC: km/h
、
kg.
3.1.2.2.
Press ENTER to set engineer mode alphabetic string display while you get
into engineer mode: The preset words are
『
WELCOME
』
, Heart Rate window
shows the sort number of word, max 20 characters include symbol and space.
Press FAST or SLOW to choice the sort number of word 1~20, press UP or
SLOW to choice the characters A~Z/0~9/space/ - , press SELECT to add sort
number of word(preset 13 sort number of words, to add sort number while
sort number at last number then press SELECT).
3.1.2.3.
Press ENTER to power setting: Dot-matrix shows
『
POWER ON
』
, press Fast
、
Slow
、
Up or Down to change to
『
POWER OFF
』
. OFF: No any display when pull
out the emergency key.
3.1.2.4.
Press ENTER to incline setting: Dot-matrix shows
『
GS INCLINE OFF
』
, press
Fast
、
Slow
、
Up or Down to change to
『
GS INCLINE ON
』
。
OFF: Incline return
to lowest position when reset. ON: Incline return to lowest position after
press START.
3.1.2.5.
Press ENTER to set AC/DC system: Dot-matrix shows
『
DC SELECTED
』
, press
Fast
、
Slow
、
Up or Down to change to
『
AC SELETED
』
.
3.1.2.6.
Press ENTER to set roller size: TIME window shows WHEL SIZE, dot-matrix
shows
『
ADJUST WHEEL SIZE THEN PRESS ENTER
』
, press Fast
、
Slow
、
Up or
Down to set the roller size, range from 1.0 to 3.5. If treadmill roller size is
70mm, please set 2.78, if roller size is 90mm please set 3.56.
3.1.2.7.
Press ENTER to set min speed: TIME window shows MIN SPEED, dot-matrix
shows
『
ADJUST MIN SPEED THEN PRESS ENTER
』
, press Fast
、
Slow
、
Up or
Down to set the min speed that you want.
3.1.2.8.
Press ENTER to set the max speed: TIME window shows MAX SPEED,
dot-matrix shows
『
ADJUST MAX SPEED THEN PRESS ENTER
』
, press Fast
、
Slow
、
Up or Down to set the max speed that you want.
3.1.2.9.
Press ENTER to set MAX ELEVATION, INCLINE window shows
『
15
』
,
dot-matrix shows
『
ADJUST MAX ELEVATION THEN PRESS START TO
Summary of Contents for M-7 SERIES E TYPE
Page 1: ......
