Document: Service Manual
Description: Treadmill
Model: M7 E / M7L E
Page: 22 of 25
22
CALIBRATION
』
do not to modify this item.
3.1.3.
Press START to begin speed calibration.
3.1.3.1.
The dot-matrix window shows
『
SPEED CALIBRATION
』
when calibrating.
3.1.3.2.
CALORIES window shows speed parameter, SPEED shows real speed value,
TIME window shows front roller RPM, speed parameter shall between
340~350 at max speed 20KPH in the normal condition.
3.1.3.3.
Calibrating the min speed to fit set min speed first, then calibrating the max
speed. It will return to idle mode after finish the calibration and to erase the
memory data of user program.
3.2.
Engineering Mode 2: Used Information Management
3.2.1.
To pull out the emergency stop key then press START and SLOW simultaneously and
put the emergency key back, to leave you hand from keys till dot-matrix window
shows WELCOME.
3.2.2.
The dot-matrix shows software version information, TIME window shows total used
time 00:00(m:s)
～
9999(h), DISTANCE window shows total used distance 0.0
～
999.
3.2.3.
You can press FAST
→
SLOW
→
FAST
→
SLOW
→
SELECT one by one to erase total
used time and distance. Press STOP back to idle mode.
3.3.
Engineering Mode 3: Real Speed and Incline Parameter
3.3.1.
Press ENTER for 5 seconds when working and buzzer will send out a “beep” sound.
SPEED window shows real speed, INCLINE window shows incline digital data
（
incline
0~15
％
= digital data 22~173
）
.
3.3.2.
Back to normal work display by press ENTER for 5 seconds and buzzer will send out
a “beep” sound.
Summary of Contents for M-7 SERIES E TYPE
Page 1: ......
