Charging the Battery
(1) Insert the charge cable into the printer charger jack, then plug
the charger into the appropriate A.C. wall socket.
(2) Power on the Printer by pressing the POWER switch. The
LED 1 blinks green light five times, then turning to flash red
light. Pressing the POWER switch again, the four LED
indicators blink green light three times, then LED 1 turning to
flash red light again. This represents the Battery Pack has
been fully charged. For more details about LED Indicators,
please refer to the Section “ LED Indicators “.
Press the POWER
Note
:
1. Use of unapproved charger could danger the Battery
Pack or the Printer.
2. The Printer should not be operated while the Battery
Pack is charging, this will result in improper charge.
3. For more information on battery safety, please refer to
he Section “
Battery Safety Information
“.
4
4
