(5) Close the Media Compartment Cover.
Note : By using label media with specific sensor setup, the
Printer performs automatic Top-of-Form by feeding
one label when closing the Media Compartment
Cover under power-on status. But the Printer doesn’t
perform Top-of-Form when using receipt media or
continuous printing.
Conducting Label Length Measurement
When using label media, you have to conduct Label Length
Measurement. Please follow the instruction indicated below to
carry out the measurement.
(1) Installing a label roll with Media Compartment Cover
opened.
(2)
Pressing FEED switch, then closing the Media Compartment
Cover.
(3)
Before the Printer starts length measurement, the LED 3
blinks three times.
(4) Three labels will be fed for executing the length
measurement. After completing the measurement, the
Printer feeds the label to printing position and is ready for
printing.
(5) If the length measurement is failed or executed without
setting the label roll, the Printer issues a jam error.
Note : When the length measurement is completed without
any problem, the values will be stored into the Flash
ROM memory.
7
7
