Cino L'OR SUPREME, User Manual

Page: 12 / 114

|
L’OR Suprême
8
EN
Take the water tank out of the machine.
Install the softener inside the water tank on
top of the outlet by turning it clockwise.
Fill up with fresh drinking water. Ensure that
the water tank is correctly aligned. [Front]
towards you. Install the lid, and close the
cover.
Place a cup under the hot water outlet,
and press the hot water button.
CAUTION Hot water will flow
from the outlet.
Repeat this 5 times.
(Empty the cup when a cycle is completed.)
Should the display show a water supply issue:
• Press OK.
• Dispense another 5 cups of hot water to
ensure that all air has dissipated from the
softener.
Open the programming mode and enter
descaling parameters (see page 16).
3.2 Water tank softener handling
A water softener (filter) can be installed inside the water tank to reduce the build-up of
limescale in your coffee machine. (Advised model: Claris CS-150 filter/softener). The table
below shows its capacity at various water hardness levels. Check the website of your water
supply company for water hardness values.
Water tank softener capacity
Exchange the softener (filter) inside the water tank after 2 months, or before that time
based on the number of consumptions. Please refer to the data below to determine the
exchange rate.
Total hardness Carbonate Hardness
(DH)
Capacity
(Ltr)
Average drinks
9–11 7–9 250 3.200
12–14 10–12 200 2.500
15–17* 13–15 150 2.000
18–20* 16–18 100 1.250
20–24* 19–20 100 1.250
23–27* 21–23 50 650
>30* >24 50 650
*We recommend to connect the machine to the mains water supply and install an in-line
softener. An inlet-valve is fitted on every machine to connect it to the mains water supply.