FuzzySca
n
Pr
o
g
ram
mi
ng Ma
n
ua
l
Configuring Your Scanner
32
PROGRAM
Symbology Reading Control
Code 128 Setting
F_DEFAULT
Family Code Selection
P.C
Parameter Selection
Option Code
Code 128 Setting
SS
SS
SS
SS
SS
SS
Disable Code 128
Enable Code 128◄
ISBT Concatenation Off◄
ISBT Concatenation On
ISBT Concatenation On – Check ISBT table
ISBT Concatenation Auto
0
1
2
3
4
5
Code 128 Min. Length
SS
MS
Default (01)◄
01-Maximum
Scan 2 digits from the option code chart in Appendix; then FuzzyScan will terminate
this selection automatically.
FIN
(2 digits)
Code 128 Max. Length
SS
MS
Default (98)◄
98-Minimum
Scan 2 digits from the option code chart in Appendix; then FuzzyScan will terminate
this selection automatically.
FIN
(2 digits)
Code 128 Security Level
SS
SS
Level 0
Level 1◄
0
1
Code 128 Setting
ISBT Concatenation Off: The scanner will not output ISBT concatenated barcodes.
ISBT Concatenation On: The scanner will only decode and output ISBT concatenated barcodes. The scanner will not decode or output single ISBT barcodes.
ISBT Concatenation On – Check ISBT table: The scanner will only output ISBT concatenated barcodes that conform to ICCBBA standards. The scanner will not
output single ISBT barcodes or ISBT concatenated barcodes that do not conform to ICCBBA standards.
ISBT Concatenation Auto: The Scanner will decode and output both ISBT concatenated barcodes and single ISBT barcodes.
Code 128 Security Level
The scanner offers two levels of decode security for Code128 barcodes:
Level 0: If you are experiencing misread of poor-printed or out-of-spec. barcode inlevel1, please select level 0.
Level 1: This is the default setting which allows the scanner to operate fastest, while providing sufficient security in decoding "in-spec." Code128barcodes.
