FuzzySca
n
Pr
o
g
ram
mi
ng Ma
n
ua
l
Configuring Your Scanner
7
CONFIGURING YOUR SCANNER
Barcode Programming Manual
The FuzzyScan barcode commands are specially designed
Proprietary
barcode labels which allow you to set the
FuzzyScan internal programming parameters. There are
System Command
,
Family Code
and
Option Code
for
programming purpose.
Each programmable family and barcode command label is
listed on the same page with major system commands. The
detailed explanations and special programming flowchart are
printed on facing or following pages. You can read the
explanation and set the FuzzyScan concurrently.
A supplemental barcode command menu incorporates the
barcode command labels of System Command and Option
Code. As you set the FuzzyScan, open the barcode
command menu to find the option code page. You may scan
the desired family code and option code to set FuzzyScan. If
you want to change the programming family for multiple
settings, you need only turn over the programming page to
find next desired programming family.
System Command
The System Command is the highest level barcode
command which directs FuzzyScan to perform immediate
operations, such as entering programming mode
(
PROGRAM
), exiting programming mode (
EXIT
), listing
system information (
SYSLIST
), recovering to factory
preset configurations (M_DEFAULT) and so on. Please
note that all system commands will take a few seconds to
complete the operations. User must wait for the
completion beeps before scanning another barcode.
Family Code
The Family Code is scanned to select the user desired
programming family. FuzzyScan has already provided
more than one hundred programming families to meet any
specific requirements.
Option Code
The Option Codes is a set of barcode commands
represented by “
0–9
”, “
A–F
” and finishing selection (
FIN
).
For most setting, you must select at least one option code
following the family code selection to set the desired
parameter for the selected programming family.
