background image

An attention matter on having you use this product 

 

 

Prohibit from foot 

wiring housing 

Please connect a power supply outlet to a power supply outlet directly if possible.   

At AC power core foot wiring housing, if use of several outlet possibly causing a fire. 

 

Prohibit 

Do not cover your 4XSATA enclosure, this could lead to overheating your 

device. 

 

Prohibit 

Please keep the device away from a place that is easy to cause shock and vibration. 

Please keep the device away from a place with high temperature, high humidity and/or 

high dust. Do not expose the drive to direct sunlight or heat. 

Make sure the device is located at least one meter away from sources of high frequency 

and/or magnetic disturbance (TV, Speaker, Mobile phone etc) in order to avoid data loss 

and operational problems.   

 

Prohibit 

Do not turn off the device or unplug the USB cable when the access LEDs are on, also, 

do not reset the PC. This will cause trouble, and data loss 

 

Attention 

Do not let children play with the device. Children cannot recognize the possible danger.

 

Attention 

Do not cover the device with any other things, it will disable the cooling system and 

cause a temp increase of the HDD. This will cause the HDD fail. Be sure to use the 

device at room temperature. 

   

Attention 

Every time you update your data make back-up copies on the external storage medium. 

We do not assume liability for data loss or damage to data storage unit, no claims can 

be accepted for damages resulting from loss of data or consequential losses. 

 

Attention 

Please do not install software in this product. There is the situation that software (word 

processor software, game software) cannot take advantage of why a program carried 

out at the time of OS start is not found in normally. 

Summary of Contents for Home CR-H408






















Reviews: