Chapter 6
How to use this product
6-1 Using the USB 4X HDD
In WINDOWS, hot swapping is allowed with some limits. To avoid system failure, always follow the
steps below to hot UN-PLUG your USB3.0 device in Windows.
6-2 Basics operation
■
Connect to a PC
1. Start your computer and wait until the OS has been loaded.
2. Please connect the USB cable from the device to PC’s USB port.
3. Connect the power cord from the USB 4X HDD device t to the outlet of theAC power and turn
ON the enclosure. You can see the “Power LED” is ON, and the IDE0 and IDE1 LED will be
turn on to off after the HDDs is ready.
Note: Make sure the PC is turn on now otherwise the device will not turn on until the PC is
started.
