CIMCO OXE Diesel 125 HP, Installation Manual

Page: 24 / 84

24
OXE 125/150/175/200 HP INSTALLATION MANUAL
MOUNTING THE OXE OUTBOARD
Determining boat transom vertical centerline (C/L)
Take the measurements a, b, c and d. Measurements a and b should be equal and so should
measurements c and d.
NOTE! Recheck the measurements and verify that the transom vertical centerline position is straight!
Fig. 8
Centerline measurements
OXE outboard twin installation
Mount both OXE outboards so that the distance of each outboard centerline to the transom centerline are equal
on both sides, i.e. measurements (e) and (f) should be the equal. Ensure to maintain a minimum distance (a)
between both vertical centerlines of the OXE outboards.
!
CAUTION
- Ensure that distance e and f are equal.
- T1 must be equal to e plus f and no less than the minimum distance A, refer to Installation
Specifications . Check dimensions.
Fig. 9
Transom centerline - dual installation