7
– 8
12) Remove the Primary Diode D1 with the soldering iron from the PCB1.
Before installing a new diode, apply a uniform coat of silicone compound (Shinetsu Silicone G-747 or
equivalent) on the base.
7.
3.2 PCB2 (WK-5417), Capacitor C1 and Resistor R1
VX[
1 ) Remove the Side Panel. [See section "
6
.1-1"]
2 ) Remove the PCB1 and D1. [See section "
7
.3-1"]
3 ) Remove the PCB6 and PCB7. [See section “
7
.3-6, 3-7”]
4 ) Remove the screw and the cable.
1
3
2
1
1
2
2
TRANSTIG 200 Pi
MAINTENANCE
SERVICE MANUAL