SERVICE MANUAL
TRANSTIG 200 Pi
March 31, 2008
4-5
4.05 Power Source Features
Feature
Description
New Digital Control
Almost all welding parameters are adjustable
Touch Panel Switches
Touch switches eliminate mechanical damage
Front Control Cover
Protects front panel controls
Displays selected weld parameter value
Displays weld current when welding
Displays weld current for 20 seconds after weld has been
completed
A selected weld parameter value can be adjusted at any
time even while welding
ON/OFF switch
Primary voltage Supply ON/OFF switch located on rear
panel
A total number of 5 programs can be saved into the 200
Pi memory
SAVE
the Current Weld Parameters into Memory
Press and hold the
SAVE
button for 3 seconds
Select a memory location by rotating the control knob, 1
to 5 is displayed on the meter
After selecting the desired memory location (ie 1 to 5),
press the right scroll button and the machine will give a
been to confirm the weld parameters from the control
panel are saved.
LOAD
(retrieve) a Program to Control Panel
Press and hold the
LOAD
button for 3 seconds
Select a memory location by rotating the control knob, 1
to 5 is displayed on the meter
After selecting the desired memory location (ie 1 to 5),
press the right scroll button and the machine will give a
been to confirm the weld parameters from the weld
parameters are loaded.
Digital Meter
Save/Load Function
Table 4-6: Power Source Features