Maximum altitude
Sub-function of function ‚Current altitude‘
Indicates the maximum altitude reached
(or set) during the current tour.
Range: -200 to 9000 m resp.
2952 ft x10
Current heart rate
Indicates the current heart rate.
Range: 30 to 240 bpm
Training time below the lower heart rate
limit
Sub-function of the function
‚Current heart rate‘.
Indicates the training time during which the
heart rate was below the lower limit set. The
upper display indicates the set heart rate limit
with a symbol (
t
), the lower display indicates the measured time.
Training time within the heart rate limits
Sub-function of the function
‚Current heart rate‘.
Indicates the training time during which the
heart rate was within the set limits. The upper
display indicates the symbol ’ ’ the lower
display indicates the measured time.
Training time above the upper heart rate
limit
Sub-function of the function
‚Current heart rate‘.
Indicates the training time during which the
heart rate was above the upper limit set. The
upper display indicates the set heart rate limit
with a symbol (
s
), the lower display indicates the measured time.
Current calorie consumption
Sub-function of the function
‚Current heart rate‘.
Indicates the current calorie consumption.
Range: 0 – 999999 kcal (the 6. position is
shown on the decimal point of the upper
display)
Total calorie consumption
Sub-function of the function
‚Current heart rate‘.
Indicates the total calorie consumption.
Range: 0 – 999999 kcal (the 6. position is
shown on the decimal point of the upper
display)
Current performance
(only in bike mode)
Indicates the current performance in Watt.
Range: 0 - 9980 W (in steps of 20 W)
Average performance
(only in bike mode)
Sub-function of function
‚Current performance‘.
Indicates the average performance in Watt of
the current tour.
Range: 0 - 9980 W (in steps of 20 W)
Maximum performance
(only in bike mode)
Sub-function of function
‚Current performance‘.
Indicates the maximum performance in Watt of
the current tour.
Range: 0 - 9980 W (in steps of 20 W)
Note:
The indicated performance values are approximate.They are
calculated under the assumption of an average friction, wind-speed,
good surface-nature of the street and the set total weight. The per-
formance can be calculated more exactly when ascending (accuracy
+/- 20 W; with strong wind deviations are larger).
On a level route, average values are indicated (accuracy approx. 40
W). During descents the display indicates zero.
Daily kilometres
(only in bike mode)
Indicates the current distance travelled (in kilo-
metres or miles).
Range: 0,00 - 999,99 km resp. 621,36 mi (in
the display the comma is shown as a colon)
Actual daily kilometres
(only in bike mode)
Sub-function of function ‚Daily kilometres‘.
If the daily kilometres were changed in the ba-
sic setting, the daily kilometres actually travelled
are indicated here. If the daily kilometres were
not changed, the sum of the daily kilometres of
bike 1 and bike 2 is indicated.
Range: 0,00 - 999,99 km resp. 621,36 mi (in the display the comma
is shown as a colon)
Total kilometres
(only in bike mode)
Sub-function of function ‚Daily kilometres‘.
Indicates the total distance travelled.
Range: 0 - 99999 km resp.. 62136 mi
Sum of the total kilometres
(only in bike mode)
Sub-function of function ‚Daily kilometres‘.
Indicates the sum of the total distance travelled
of bike 1 and bike 2.
Range: 0 - 99999 km resp. 62136 mi
5.3 General functions
Heart rate automatic
If the HAC 4000 does not receive a signal from the transmitter belt
within 5 minutes (e.g. transmitter belt or receiver are out of range ),
the heart rate receiver of the
HAC
turns automatically off
(symbol ’ ’ disappears in the display). The receiver turns on, when
the function ‚current heart rate‘ is chosen again in the display.
Light/Light manager
By pressing LL-button 4 sec. the light is switched on for 5 sec.
By pressing LL-button 6 sec. the light manager is activated. I.e. in
the next 8 hours light is switched on for 5 sec. automatically with
every button press.
To deactivate the light manager press again LL-button 6 sec.
Note:
Light requires a lot of battery power, so if you use it very often,
battery life will be reduced.
11
batterie low
Countdown
Wecker
hf alarm
bargraph
stromsparmodus
