EN-
39
POWERCIAT LX ST/HE/XE
8.2.4 - LX 1858 to 2308 - heat recovery option
8.2.5 - LX 2528 to 2628 - heat recovery option
The condenser connection sleeves are not installed,
but supplied with the unit. The sealing gaskets are
in the electrics box. The temperature sensors and
the condenser flow switch are wired and fixed in the
machine. They must be installed as described in the
chapter “Condenser water connections”.
NOTES:
•
Drawings are not contractually binding.
•
Before designing an installation, consult the certified
dimensional drawings, available on request.
•
For the positioning of the fixing points, weight distribution
and centre of gravity coordinates please refer to the
dimensional drawings.
• If the installation includes several units or if this (these)
is (are) close to walls, please refer to chapters 3.11
“Multiple chiller installation” and 3.12 “Distance to the
wall” of this document to determine the space required.
8 - HEAT RECLAIM CONDENSER OPTION
Key
All dimensions are given in mm.
1
Required clearances for maintenance
(see note)
2
Recommended space for evaporator tube
removal
Water inlet for standard unit
Water outlet
Air outlet – do not obstruct
Power supply and control connection
A
Heat reclaim condenser
