8 - WATER CONNECTIONS
Hydraulic manifold (water manifold option):
The hydraulic manifold option is used to facilitate hydraulic connection of the two modules. It provides a single connection point for
the water inlet and outlet .
Two compensators are provided with the hydraulic manifold. They enable the two modules to be connected and absorb any installation
deviations. The customer must install these compensators when the two modules are installed.
Water manifold option without hydraulic pump kit
Water manifold option with hydraulic pump kit
Remarks:
■
To allow the compensators to be installed, the position of the two modules and the distance between each module must
conform to the certified dimensional drawings.
■
The frost protection option (water manifold frost protection option) provides thermal insulation for the hydraulic manifold
water pipes and the frost protection.
AQUACIAT
POWER
™ LD/ILD
EN-40
