Chungho Iguassu ICE 500, User Manual

Page: 14 / 24

14
6 6.. U Ussa ag ge e
(4) Ice Making function release
①
Touch CONST button for over 10 seconds.
②
Ice Lamp (Red) is turned off and the ice making function is released
(Setting sound: Ding~ding~ding~)
※
When it is released, remained ice is dispensed until the ice storage house is being
emptied. But ice-making function is disabled.
※
As pressing the button, continuous water dispenser function is automatically set after
2 seconds and a setting of Ice making function is released over 10 seconds.
Continuous water dispenser function automatically is released after 5 seconds.
(5) Hot water operation setting
If hot water operation display LED (Red) is turned off, hot water system operates by
touching LOCK/HOT button and Hot (hot water selection) button simultaneously for
over 2 seconds.
※ Hot water system is operated by a detection sensor, which automatically detects the
temperature inside of the hot water tank.
(6) Hot water operation release
If the hot water operation display LED is turned on, then the hot water system stops by
touching LOCK/HOT button and Hot (hot water selection) button simultaneously
for over 2 seconds.
※ Hot water operation/release function operates when LOCK function is enabled.
(7) Continuous water dispenser function
① This function is for dispensing ambient/cold water continuously. Touch CONST/ICE
button for 2 seconds, then LED (Red) is turned on. (When the function is set, ambient
water is selected by default.)
②
Touch COLD/AMBI button and press Water dispenser button, then continuous water
dispenser function is set as sounding "Ding-dong"(While dispensing water continuously,
Water dispenser Button LED is turned off.)
※
If continuous water dispensing is undone for 10 seconds, the function is automatically released.
※
Continuous hot water dispenser is unattainable.
(8) Continuous water dispenser function release
While dispensing ambient/cold water continuously, the function is released by touching
either COLD (cold water selection) or AMBI (ambient water selection) as sounding
"Ding-Dong" (As continuous water dispenser function releases, LED is turned off.)
(9) Disabling Beep Sound
① Press CONST/ICE and HOT (hot water selection) buttons at the same time over
3seconds.
②
When it is released HOT/LOCK and CONST/ICE LED are blinking 5 times by one second
interval with keep sound "Ding~ding~ding~ding~ding~"
(10) Enabling Beep Sound
①
While the beep sound function is disabled, press CONT/ICE and HOT (hot water selec-
tion) buttons at the same time over 3seconds.
② When it is reset HOT/LOCK and CONST/ICE LED are blinking 5 times by one second
interval with keep sound "Ding~ding~ding~ding~ding~"