Chungho Iguassu ICE 500, User Manual

Page: 6 / 24

6
2 2.. S Sa affe etty y P Prre ecca au uttiio on nss
●
To avoid burns from hot
water, always use containers
such as a cup during hot
water dispensing.
●
Before cleaning the inside of
product, always unplug the
power plug.
(There is danger of electric
shock or fire.)
●
When dispensing ice, place a
container close to the ice dis-
pensing hole, touch the ICE
touch sensor button, and
attempt to keep ice from being
scattered on the floor.
(Take care in order not to
allow containers such as cups,
etc. to be inserted into the
inside of ice dispensing hole.)
●
Do not put foreign materials
into the ice dispensing hole or
block the dispensing hole.
(This can cause system
malfunction.)
●
After transporting the product,
do not supply the power for
at least 30 minutes to stabilize
the product.
●
Do not attempt to operate the
product if installed at over a
15
° incline.
(This can be the cause of
malfunction or unwanted
troubles.)
●
Do not tilt the product over
45
°
during transportation.
(Severe inclination can
cause reduced performance.)
●
Do not install the product in a
sloped or unstable position.
(This can cause reduced perfor-
mance, system damaging, or
overall troubles.)
●
Do not install the product in a
place where the surrounding
temperature may drop below
32
O
F.(0
O
C)
Use in order to avoid injury, property damage, and reduced product performance.
Caution