Chrysler 2014 Ram Truck 1500 Owner'S Manual Download Page 88 | Manualshive

Page: 88 / 806

Chrysler 2014 Ram Truck 1500 Owner'S Manual Download Page 88

Infants And Child Restraints

Safety experts recommend that children ride rearward-
facing in the vehicle until they are two years old or until
they reach either the height or weight limit of their rear
facing child safety seat. Two types of child restraints can
be used rearward-facing: infant carriers and convertible
child seats.

The infant carrier is only used rearward-facing in the
vehicle. It is recommended for children from birth until
they reach the weight or height limit of the infant carrier.
Convertible child seats can be used either rearward-
facing or forward-facing in the vehicle. Convertible child
seats often have a higher weight limit in the rearward-
facing direction than infant carriers do, so they can be
used rearward-facing by children who have outgrown
their infant carrier but are still less than at least two years
old. Children should remain rearward-facing until they
reach the highest weight or height allowed by their
convertible child seat.

WARNING!

•

Never place a rear facing infant seat in front of an
air bag. A deploying Passenger Advanced Front Air
Bag can cause death or serious injury to a child 12
years or younger, including a child in a rearward
facing infant seat.

•

Only use a rearward-facing child restraint in a
vehicle with a rear seat.

86

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

«
...
86
87
88
89
90
...
»

Summary of Contents for 2014 Ram Truck 1500







































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments