Home
/
Chrysler
/
2014 Ram Truck 1500
/
Owner'S Manual

Chrysler 2014 Ram Truck 1500, Owner'S Manual, Page: 142 / 806

Share

Page: 142 / 806

Chrysler 2014 Ram Truck 1500 Owner'S Manual Download Page 142

Outside Mirrors Folding Feature

All outside mirrors are designed to be able to be manu-
ally folded both forward and rearward to prevent dam-
age.

CAUTION!

It is recommended to fold the mirrors into the full
rearward position to resist damage when entering a
car wash or a narrow location.

Tilt Mirrors In Reverse — If Equipped

Tilt Mirrors in Reverse provides automatic outside mirror
positioning which will aid the driver’s view of the
ground rearward of the front doors. The outside mirrors
will move slightly downward from the present position
when the vehicle is shifted into REVERSE. The outside
mirrors will then return to the original position when the
vehicle is shifted out of the REVERSE position. Each
stored memory setting will have an associated Tilt Mir-
rors in Reverse position.

NOTE:

The Tilt Mirrors in Reverse feature is not turned

on when delivered from the factory.

Folding Mirror

140

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

«
...
140
141
142
143
144
...
»

Summary of Contents for 2014 Ram Truck 1500







































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments