Home
/
Chrysler
/
2014 Ram Truck 1500
/
Owner'S Manual

Chrysler 2014 Ram Truck 1500, Owner'S Manual, Page: 225 / 806

Share

Page: 225 / 806

Chrysler 2014 Ram Truck 1500 Owner'S Manual Download Page 225

General Information

This device complies with FCC rules Part 15 and Industry
Canada RSS-210. Operation is subject to the following
two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference that may be

received including interference that may cause unde-
sired operation.

NOTE:

•

The transmitter has been tested and it complies with
FCC and IC rules. Changes or modifications not ex-
pressly approved by the party responsible for compli-
ance could void the user’s authority to operate the
device.

•

The term IC before the certification/registration num-
ber only signifies that Industry Canada technical speci-
fications were met.

3

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

223

«
...
223
224
225
226
227
...
»

Summary of Contents for 2014 Ram Truck 1500







































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments