Home
/
Chrysler
/
2014 Ram Truck 1500
/
Owner'S Manual

Chrysler 2014 Ram Truck 1500, Owner'S Manual, Page: 524 / 806

Share

Page: 524 / 806

Chrysler 2014 Ram Truck 1500 Owner'S Manual Download Page 524

When the parking brake is applied with the ignition
switch ON, the “Brake Warning Light” in the instrument
cluster will illuminate.

NOTE:

•

When the parking brake is applied and the transmis-
sion is placed in gear, the “Brake Warning Light” will
flash. If vehicle speed is detected, a chime will sound
to alert the driver. Fully release the parking brake
before attempting to move the vehicle.

•

This light only shows that the parking brake is ap-
plied. It does not show the degree of brake application.

When parking on a hill, it is important to turn the front
wheels toward the curb on a downhill grade and away
from the curb on an uphill grade. Apply the parking
brake before placing the shift lever in PARK, otherwise
the load on the transmission locking mechanism may
make it difficult to move the shift lever out of PARK. The
parking brake should always be applied whenever the
driver is not in the vehicle.

Parking Brake Release

522

STARTING AND OPERATING

«
...
522
523
524
525
526
...
»

Summary of Contents for 2014 Ram Truck 1500







































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments