Chrysler 2014 Ram Truck 1500 Owner'S Manual Download Page 71 | Manualshive

Page: 71 / 806

Chrysler 2014 Ram Truck 1500 Owner'S Manual Download Page 71

NOTE:

The Driver and Front Passenger Advanced Front

Air Bags are certified to the new Federal regulations for
Advanced Air Bags.

The Advanced Front Air Bags have a multistage inflator
design. This allows the air bag to have different rates of
inflation based on several factors, including the severity
and type of collision.

This vehicle may be equipped with a driver and/or front
passenger seat belt buckle switch that detects whether
the driver or front passenger seat belt is fastened. The
seat belt buckle switch may adjust the inflation rate of the
Advanced Front Air Bags.

This vehicle may also be equipped with Supplemental
Side Air Bag Inflatable Curtains (SABIC) to protect the
driver, front, and rear passengers sitting next to a win-
dow. If the vehicle is equipped with SABIC air bags, they
are located above the side windows and their covers are
labeled: SRS AIRBAG.

Advanced Front Air Bag And Knee Bolster Locations

1 — Driver And Passenger Ad-
vanced Front Air Bags

2 — Knee Bolster

2

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

69

«
...
69
70
71
72
73
...
»

Summary of Contents for 2014 Ram Truck 1500







































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments