Home
/
Chrysler
/
2014 Ram Truck 1500
/
Owner'S Manual

Chrysler 2014 Ram Truck 1500, Owner'S Manual, Page: 521 / 806

Share

Page: 521 / 806

Chrysler 2014 Ram Truck 1500 Owner'S Manual Download Page 521

If the Steering icon is flashing, it indicates that the vehicle
needs to be taken to the dealer for service. It is likely the
vehicle has lost power steering assistance.

If the Steering icon is displayed and the “POWER STEER-
ING SYSTEM OVER TEMP” message is displayed on the
EVIC screen, they indicate that extreme steering maneu-
vers may have occurred which caused an over tempera-
ture condition in the power steering system. Once driv-
ing conditions are safe, pull over and let the vehicle idle
for a few moments until the icon and message turn off.
Refer to “Electronic Vehicle Information (EVIC)” in “Un-
derstanding Your Instrument Panel” for further informa-
tion.

If the Steering icon is displayed and the “SERVICE
POWER STEERING – ASSIST OFF” message is displayed
the EVIC screen, they indicate the vehicle needs to be
taken to the dealer for service. Refer to “Electronic

Vehicle Information (EVIC)” in “Understanding Your
Instrument Panel” for further information.

NOTE:

•

Even if the power steering assistance is no longer
operational, it is still possible to steer the vehicle.
Under these conditions there will be a substantial
increase in steering effort, especially at low speeds and
during parking maneuvers.

•

If the condition persists, see your authorized dealer for
service.

POWER STEERING — 2500/3500 MODELS

The standard power steering system will give you good
vehicle response and increased ease of maneuverability
in tight spaces. The system will provide mechanical
steering capability if power assist is lost.

5

STARTING AND OPERATING

519

«
...
519
520
521
522
523
...
»

Summary of Contents for 2014 Ram Truck 1500







































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments