Chrysler 2012 Ram Truck Gas 1500 Owner'S Manual Download Page 380 | Manualshive

Page: 380 / 720

background image

WARNING! (Continued)

•

If the vehicle has a discharged battery, booster
cables may be used to obtain a start from a booster
battery or the battery in another vehicle. This type
of start can be dangerous if done improperly. Refer
to “Jump Starting” in “What To Do In Emergen-
cies” for further information.

If the engine has been flooded, it may start to run, but not
have enough power to continue running when the key
fob is released. If this occurs, continue cranking with the
accelerator pedal pushed all the way to the floor. Release
the accelerator pedal and the key fob once the engine is
running smoothly.

If the engine shows no sign of starting after two 15-
second periods of cranking with the accelerator pedal
held to the floor, the “Normal Starting” procedure should
be repeated.

After Starting

The idle speed is automatically controlled and will de-
crease as the engine warms up.

ENGINE BLOCK HEATER — IF EQUIPPED

The engine block heater warms the engine, and permits
quicker starts in cold weather. Connect the cord to a
standard 110-115 Volt AC electrical outlet with a
grounded, three-wire extension cord.

1500 Models

The engine block heater cord is routed under the hood on
the passenger side of the vehicle near the right head lamp
assembly. It is located between the front grill and the
radiator, but underneath the black upper seal.

2500/3500 Models

The engine block heater cord is routed through the grille
by the right front tow hook.

378

STARTING AND OPERATING

«
...
378
379
380
381
382
...
»

Summary of Contents for 2012 Ram Truck Gas 1500

















































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2012 Ram Truck Gas 1500

Brand: Ranger design Pages: 6

DAF POWERCHOICE 250A

Brand: Paccar Pages: 20

Brand: Axxess Pages: 4

Brand: Vintage Air Pages: 14

Lippert Components LEVELEGS MPD 66385

Brand: Atwood Pages: 6

65 41 2 152 528

Brand: BMW Pages: 21

Brand: Nav TV Pages: 4

TRI-FOLD PG9300RF

Brand: Pet Gear Pages: 4

Brand: Hama Pages: 4

Brand: Volvo Pages: 230

Brand: BraunAbility Pages: 46

Brand: MMD Pages: 3

Brand: Crux Pages: 10

Brand: SpeedTech Lights Pages: 2

Brand: Scosche Pages: 32

Brand: Mazda Pages: 196

Brand: Skoda Pages: 288

Brand: Volvo Pages: 275

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands