Chrysler 2012 Ram Truck Gas 1500 Owner'S Manual Download Page 318

Page: 318 / 720

Controlling The iPod

姞

Or External USB Device

Using Radio Buttons

To get into the iPod

威

/USB/MP3 control mode and access

a connected audio device, either press the “AUX” button
on the radio faceplate or press the VR button and say

⬙

USB

⬙

Switch to USB

⬙

. Once in the iPod

威

/USB/MP3

control mode, audio tracks (if available from audio
device) start playing over the vehicle’s audio system.

Play Mode

When switched to iPod

威

/USB/MP3 control mode, the

iPod

威

or external USB device automatically starts Play

mode. In Play mode, the following buttons on the radio
faceplate may be used to control the iPod

威

or external

USB device and display data:

•

Use the TUNE control knob to select the next or
previous track.

•

Turning it clockwise (forward) by one click, while
playing a track, skips to the next track or press the
VR button and say

⬙

Next Track

⬙

•

Turning it counterclockwise (backward) by one
click, will jump to the previous track in the list or
press the VR button and say

⬙

Previous Track

⬙

•

Jump backward in the current track by pressing and
holding the <<

button. Holding the <<

button long enough will jump to the beginning of
the current track.

•

Jump forward in the current track by pressing and
holding the

>> button.

•

A single press backward <<

or forward

>> will

jump backward or forward respectively, for five
seconds.

•

Use the <<

SEEK

and

SEEK

>> buttons to jump to the

previous or next track. Pressing the

SEEK

>> button

316

UNDERSTANDING YOUR INSTRUMENT PANEL

Summary of Contents for 2012 Ram Truck Gas 1500

















































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2012 Ram Truck Gas 1500

Reviews:

Related manuals for 2012 Ram Truck Gas 1500

Brands by name

Popular brands

Chrysler 2012 Ram Truck Gas 1500, Owner'S Manual

Search results

Summary of Contents for 2012 Ram Truck Gas 1500

Reviews:

Related manuals for 2012 Ram Truck Gas 1500

Brands by name

Popular brands