Chrysler 2012 Ram Truck Gas 1500 Owner'S Manual Download Page 462 | Manualshive

Page: 462 / 720

background image

1.

Motor:

The winch motor is powered by the vehicle

charging system and features a thermal protection switch
that automatically stops motor function in the power-in
direction if the motor gets too hot.

2.

Remote Socket:

The remote socket allows the remote

control to be attached to the control pack to allow the
winch to function.

3.

Winch Drum With Integral Brake:

The winch drum

allows the wire rope to be stored on the winch and
transmits force to the wire rope. The winch is equipped
with an integral brake that will stop rotation of the winch
drum if the winch motor is stopped.

4.

3-Stage Planetary Gear Set:

Provides balance between

speed and pulling power.

5.

Wire Rope:

The wire rope allows the winch to be

connected to an anchor to provide a pulling force.

6.

Clutch Lever:

The clutch lever allows the winch drum

to be disconnected from the winch motor to allow the
wire rope to be pulled from the winch by hand.

7.

Remote Control:

The remote control provides the

interface between the winch operator and the winch. The
remote control provides the ability to power the winch in,
out, and stop the winch. To operate the winch, the toggle
switch is pressed down to power the winch in and up to
power the winch out. The winch will stop if the switch is
left in the neutral (center) position.

CAUTION!

If not installed, the hook strap must be placed on the
hook.

Fairlead:

The fairlead acts as a guide for the wire rope

and minimizes damage to the rope.

460

STARTING AND OPERATING

«
...
460
461
462
463
464
...
»

Summary of Contents for 2012 Ram Truck Gas 1500

















































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2012 Ram Truck Gas 1500

Brand: Warrior Products Pages: 3

Brand: AMP Research Pages: 12

Half Size Trunk Box Organizer C-TBO-CV

Brand: Havis-Shields Pages: 1

Brand: Volvo Pages: 8

Brand: Webasto Pages: 34

Brand: Webasto Pages: 18

Brand: Whispbar Pages: 15

Hatch-bag Luggage System

Brand: Tabernus Peram Pages: 10

Brand: Audi Pages: 63

Brand: RAM Pages: 148

Brand: Hamron Pages: 36

Brand: Conrad Pages: 50

Brand: Cadillac Pages: 19

Brand: Phonocar Pages: 28

Brand: Volvo Pages: 16

2004 JR41 Stratus Sedan

Brand: Dodge Pages: 273

Brand: Painless Performance Pages: 16

Brand: EUFAB Pages: 8

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands