Chrysler 2012 Ram Truck Gas 1500 Owner'S Manual Download Page 196

Page: 196 / 720

Reprogramming A Single HomeLink

威

Button

To reprogram a channel that has been previously trained,
follow these steps:

1. Turn the ignition switch to the ON/RUN position.

2. Press and hold the desired HomeLink

威

button until

the EVIC displays “CHANNEL # TRAINING”

Do not

release the button.

Without releasing the button

proceed with “Program-

ming A Rolling Code” Step 2 and follow all remaining
steps.

Programming A Non-Rolling Code

For programming Garage Door Openers manufactured
before 1995.

1. Turn the ignition switch to the ON/RUN position.

2. Place the hand-held transmitter 1 to 3 inches (3 to
8 cm) away from the HomeLink

威

button you wish to

program.

3. Simultaneously press and hold both the Homelink

威

button you want to program and the hand-held transmit-
ter button.

4. Continue to hold buttons until the EVIC display
changes from “CHANNEL # TRAINING” to “CHAN-
NEL # TRAINED”, then release both buttons.

NOTE:

•

It may take up to 30 seconds or longer in some cased
for the channel to train.

•

If the EVIC displays “DID NOT TRAIN” repeat from
Step 2.

194

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Summary of Contents for 2012 Ram Truck Gas 1500

















































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2012 Ram Truck Gas 1500

Reviews:

Related manuals for 2012 Ram Truck Gas 1500

Brands by name

Popular brands

Chrysler 2012 Ram Truck Gas 1500, Owner'S Manual

Search results

Summary of Contents for 2012 Ram Truck Gas 1500

Reviews:

Related manuals for 2012 Ram Truck Gas 1500

Brands by name

Popular brands