XT Series Timer
ChronTrol
34
User's Guide
Input Review
If your XT is equipped with inputs, you can review the status of an input
(enabled or disabled) and what circuits, programs, or other inputs it controls.
1.
Press
ENTER
, then
INPUT
.
– –
displays.
2.
Type the number (1-8) of the input you want to review.
3.
Press
ENTER
. Status displays. See
Figure 7
for status information.
You can review the list of circuits and other assignments controlled by this
input by stepping through each assignment in sequence.
4.
Press
REVIEW
. The first assignment displays. If no assignments are set
or you reach the end of the list, a dash (
–
) displays.
NOTE
: If the decimal point on the display is lit, the control
assignment is turned ON by this input. If the decimal
point on the display is unlit, the control assignment is
turned OFF by this input.
5.
Press
REVIEW
repeatedly to move through the list one entry at a time.
Assignments display in numerical order. Pressing
CIRCUIT
followed by
REVIEW
at any time returns you to the beginning of the list.
6.
To exit the review at any time, press
TIME
.
Cross Reference Review
Cross Reference review is a quick way to identify which programs and inputs
control a given Control Assignment (circuit, program, or input).
1.
Press
CIRCUIT
.
C–
displays, OR press
PROGRAM
.
P–
displays, OR press
INPUT
.
– –
displays.
2.
Type the number of the Control Assignment you wish to find.
3.
Press
REVIEW
. ChronTrol begins scanning all programs and inputs, and
displays the number of the first program or input that controls this
Control Assignment.
4.
Press
REVIEW
repeatedly to search for more. A dash (
–
) indicates there
are no more.
5.
Press
TIME
to return to the Time of Day display when you are finished.
NOTE
: If you skip step 2, ChronTrol stops at all programs and
inputs that control
anything
.
Summary of Contents for XT Series
Page 1: ......
