XT Series Timer
ChronTrol
30
User's Guide
Reviewing System Parameters
The following section explains how to review system parameters:
Review the Date
1.
Press
DATE
. The current date setting appears in the display.
2.
Optional -
Press
SECOND/YEAR
to display the current year in the two
rightmost digits of display.
3.
Press
TIME
to return to the Time of Day display.
Review the Day of the Week
1.
Press
DAY /OMIT
. The stroke for the current Day of Week lights up.
2.
Press
TIME
to return to the Time of Day display.
Review the Holiday List
1.
Press
DAY/OMIT
,
DATE
, then
REVIEW
. The first date in the Holiday
List displays (month and day). If no holidays are set or you reach the end
of the list, a dash (
–
) appears on the display.
2.
Press
REVIEW
repeatedly to move through the list one date at a time.
Holidays appear in numerical order beginning with March 1. Pressing
DATE
followed by
REVIEW
at any time returns you to the first date in the
list.
3.
Press
TIME
to return to the Time of Day display.
Review Seconds
1.
Press
SECOND
. The seconds display in the two rightmost digits.
2.
Press
TIME
. The display returns to hours and minutes.
Status Display for Program Review and Input Review
Figure 7
on the next page illustates the organization of Program Status and
Input Status information, which is described in the sections on Program
Review (Step A:
Program Status
on p. 32) and Input Review (p. 34). The
"Status Blocks" shown here are locations on the display where status
information appears. In particular, Blocks 1 and 2 consist of the two middle
digits of the display, Block 3 is the two rightmost digits, and Block 4 is
simply the decimal point. When these blocks contain the characters described
in the adjoining chart, they can tell you much about the program or input you
are reviewing.
Summary of Contents for XT Series
Page 1: ......