ChronTrol
XT Series Timers
User's Guide
23
Step 3 - On/Off or Interval Program
If this program is an
On/Off Program
, skip to the On/Off procedure on page
24. If this program is an
Interval Program
, use the following steps to
specify the type of interval you wish to set. If the Interval is 24 hours or
more, specify the Interval in days, hours, minutes, and seconds.
Interval Program
See Appendix A:
Special Programming Considerations
for a discussion of
Interval types.
NOTE:
Interval Programs will not switch until activated by an
input, by another program, or through the keyboard.
1.
Decide which type of
Interval Program
(0-3) you want.
2.
Set the duration or interval length in hours and minutes (
HHMM
). The
interval length displays. Press
0
if Interval is less than one minute.
3.
Optional -
Press
SECOND
.
00
displays in the two rightmost digits.
4.
Optional -
Set the desired seconds. The seconds display in the two
rightmost digits.
5.
Optional -
Press
DATE
. A dash (
–
) displays if no previous setting was
made.
6.
Optional -
Enter the number of whole days within the interval length (1 to
365). The number of days displays.
7.
Skip to Step 4 -
Specify Omitted Days
.
For
Type 0
Interval (ON, then OFF after Interval), press
ON
OFF
INTERVAL
, or
INTERVAL
only.
For
Type 1
Interval (OFF after Interval), press
OFF
INTERVAL
.
For
Type 2
Interval (OFF, then ON after Interval), press
OFF
ON
INTERVAL
.
For
Type 3
Interval (ON after Interval), press
ON
INTERVAL
.
Summary of Contents for XT Series
Page 1: ......