ChronTrol
XT Series Timers
User's Guide
17
Two Simple Programs
The following instructions demonstrate how to program the XT to perform
simple timing operations.
First, set an
On/Off Program
to turn Circuit #1 ON at 1:00 p.m. and OFF at
1:02 p.m. each day as follows:
1.
Press
ENTER
.
E–
displays in the window.
2.
You could type in your own program number (1-40), OR you could press
ENTER
again to display the
next available
program number. For this
demonstration, choose program #2 by pressing
2
.
E–02
displays.
3.
Press
CIRCUIT
.
C–
displays.
4.
Type
1
.
C–01
displays.
5.
Press
ON
. A dash (
–
) displays.
6.
Set the ON time. Press
1
0
0
AM/PM
.
100.
displays.
7.
Press
OFF
. A dash (
–
) displays.
8.
Set the OFF time. Press
1
0
2
AM/PM
.
102.
displays.
9.
Press
ENTER
to store the last entry.
P–02.
displays.
10. Press
TIME
to exit the program and return to the Time of Day display.
Now, you could sit and wait for 1:00 p.m. to arrive. OR you could set an
Interval Program
to turn Circuit #1 ON for 2 minutes RIGHT NOW:
Set an
Interval Program
to turn Circuit #1 ON for 2 minutes as follows:
1.
Press
ENTER
.
E–
displays in the window.
2.
Press
ENTER
again to display the next available program, or type in you
own program number. In this example, type
3
.
E–03
displays.
3.
Press
CIRCUIT
.
C–
displays.
4.
Press
1
.
C–01
displays.
5.
Press
INTERVAL
. A dash (
–
) displays.
6.
Set the duration. Press
2
.
0002
displays.
7.
Press
ENTER
to store the last entry.
0 03
displays.
8.
Press
TIME
to exit the program and return to the Time of Day display.
Now activate the program as follows:
9.
Press
PROGRAM 3 ON
. The Time of Day displays and Circuit #1
immediately turns ON for 2 minutes.
Summary of Contents for XT Series
Page 1: ......