DMX Protocol
V1.01
RGBW single
[128 ch per output]
RGBW
RGBW output
[4 ch per assigned
output]
RGBW
Tungsten
[1 ch]
W
Channel 1
Red for fixture 1
Red for output
White for all fixtures (RGBW
combined)
Channel 2
Green for fixture 1
Green for output
Channel 3
Blue for fixture 1
Blue for output
Channel 4
White for fixture 1
White for output
Channel 5
Red for fixture 2
Channel 6
Green for fixture 2
Channel 7
Blue for fixture 2
Channel 8
White for fixture 2
Channel 9
Red for fixture 3
Channel
10
Green for fixture 3
...and so on up to
fixture 32 per output
....
Total
128 DMX channels
per output
4 DMX channels per
output
1 DMX channel
Troubleshooting
Troubleshooting is a process of elimination. First, rule out the other field factors (i.e. bad
connections, faulty cables and power supplies). For technical support and/or parts, please contact
your selling dealer or the offices listed in this manual.
Symptom
Possible Cause
Solution
Fixture does not respond to
DMX control.
•
The External Control Box is
set to the wrong or different
DMX address.
•
Bad cable connecting DMX
control and External
Control Box.
•
Bad cable connecting DMX
control and fixture.
•
Bad in/through connection
between daisy-chained
fixtures.
•
Bad in/through connection
between daisy-chained
External Control Boxes.
•
Check DMX address and
Mode settings.
•
Check/replace DMX run
from the console to the
External Control Box.
•
Check/replace DMX runs
from the External Control
Box to the fixtures.
•
Check/replace DMX runs
between daisy-chained
fixtures.
•
Check/replace DMX runs
between daisy-chained
External Control Boxes.
Low LED output.
•
Internal temperature of the
fixture is over the limit.
•
Check area ventilation.
Flicker
•
No termination resistor
•
Check the first fixture in
