Chroma Inspire UL924, User Manual

Page: 13 / 22

Change DMX Address screen:
The screen shows the current DMX start address and the new DMX start address. In the screen,
the numeric command buttons can be tapped to set the new DMX start address.
Command
Button
Description
0
– 9
Button numbers 0 to 9 for typing the new DMX start address.
Apply Save the new DMX address.
Escape Exit the screen without saving.
Change Mode screen:
The table shows the control options available in the Change Mode screen:
Command
Button
Description
RGBW single 4 channels for Red, Green, Blue & White per fixture in a single output (512
channels for a maximum of 128 fixtures per single output)
RGBW output 4 channels for Red, Green, Blue & White per output
Tungsten 1 channel for White for all fixtures per output
0-10V 1 channel for 0
– 10V dimming control
LookStore A Look can be recorded in the LookStore screen and set as an output option
when DMX in not present (see DMX Lost)
Apply Save the settings
Escape Exit the screen without saving
Command Buttons:
Tap to access each
Port (DMX output)