This command rotates the display screen by 180 degrees.
To rotate the display screen,
1. On the Main Menu, tap
Setup Menu
2. On the Setup screen, tap
RotateDisp
The display screen rotates by 180 degrees.
► Frequency
In this menu, the fixture can be set to four frequency options. The LED scan rate can
be synchronised with the video camera to avoid a flickering effect.
Frequency options:
1200 Hz
2400 Hz
4800 Hz
9600 Hz
To set the Frequency,
1. On the Main Menu, tap
Setup Menu
2. On the Setup screen, tap
Frequency
3. On the PWM Frequency screen, select and tap a Frequency option, then tap
Apply
to save.
The screen goes to the Setup screen.
► DMX Lost
In this menu, output options can be selected if the fixture does not detect DMX
signal:
Output options:
Last data
Fixture holds the last valid DMX state
No output Fixture output is off
Look
Saved Look in LookStore
To set DMX Lost,
1. On the Main Menu, tap
Setup Menu
2. On the Setup screen, tap
DMX Lost
3. On the DMX Lost screen, select and tap an output option
4. Tap
Apply
to save
The screen goes to the Setup screen.
► Reset
