Chroma Inspire UL924, User Manual

Page: 17 / 22

This mode assigns 1 channel from the external analog control source.
To set the 0-10V mode,
1. On the Main Menu, tap Mode
2. On the Mode screen, tap 0-10V
3. Tap Apply to save or Escape to cancel
The display goes back to the Main Menu.
► Look Store
In this menu, 3 distinct looks can be stored for playback:
Alarm This look has the highest priority and is played back in the event of a
dry contact closure provided from an external alarm system. This
look overrides the DMX input.
Emergency This look is triggered when Main power is lost and Emergency
Power is active. This look overrides the DMX input at the Mains
power.
Look This look can be recalled from the control box or selected to be
played in the event of DMX loss.
Note: All looks are programmed in default with all DMX values to 80%.
A Look or preset can be created with a DMX controller and played back using Look
Store.
To save a Look,
1. Create a Look with your console
2. Tap
Mode , then Look Store
3. On the Look Store screen tap and hold the look type you want to record. A
text prompt appears on the display indicating the Look is stored. The saved
Look can be loaded and played back.
To Load a Look in Look Store,
1. Create a Look with your console using the steps above
2. Tap
Mode , then Load Look
►
Setup Menu
In this menu, internal settings can be re-configured.
DMX Data
RotateDisp
Frequency
DMX Lost
Reset
►
DMX Data
In this menu, the screen shows the DMX start address and the equivalent value for
each of the DMX channels assigned.
To show DMX Data,
1. On the Main Menu, tap Setup Menu
2. On the Setup screen, tap DMX Data
Tap Escape to exit.
► RotateDisp