36
Operation Instructions
In standby state
Press combination key
/ , open/close the real running program ;
Real Running Switch:
Turn on Real Running , user need to run in the treadmill, the system wiil calculate kilometer and running steps.
Enter the interface as shown on the right picture;
If 300km are gone the display show an note and reminder to
lubricate the backside of running surface.
You can cancel this information by pressing Stop key for 3
seconds.
Under standby mode, press
“ ” “ ” “ ” “ ” “ ” “ ” “ ”
“ ” “ ” “ ” “ ” “ ”, then press ” ”,
Enter the interface as shown on the right picture;
Under standby mode, press
“ ” “ ” “ ” “ ” “ ” “ ” “ ”
“ ”, then press ” ”
Switch UI interface
Under standby mode, press
„ „ /
