25
English
Step 7:
Checks
1. Check the correct installation and function of all screwed and
plug connections.
2. When everything is in order, connect the power supply cable
(107) with wall power (220-240V~50-60Hz) and switch on the
main switch below the front frame.
3. Lock the safety key (87) at computer into “on” position. Put the
safety clip (87) at your exercising cloth and stand on the side rails
(38). Slide with your hand over the computer so that the computer
switch on into Start mode. Press Start-Button and after a 3sec
count down the treadmill start moving. Start walking onto the
walk surface (23) when speed is slowly and follow the speed.
Familiarize yourself with the machine at a low speed settings.
4. Run in the middle of the running surface (23), hold yourself tight at
hand grips (11) if you feel insecure and don’t step on the side
foot rails (38). Only run with look at the Computer on the tread-
mill during the running. In emergency case, step of the treadmill
lateral and hold on to the hand grips (11).
5. If you like to use an external MP3 player for example, connect
with cable (110) and computer.
Note:
Please keep the tool set and the instructions in a safe place as
these may be required for repairs or spare parts orders becoming
necessary later.
Step 6:
1. Put the base covers left and right (30L+R) in the correct position
to the supports left and right (3L+R) and attach them by using
screws 4x16 (75).
2. Put the bottom frame covers left and right (31L+R) in the correct
position to the base metal plates (12L+R) and attach them by
using screws 4x16 (75).
