Christie TVC-1211, User Manual, Page: 9 / 46

TVC -1211 User Manual 1-1
020-100769-01 Rev. 4 (05-2012)
1 Introduction
1.1 Labels and Marking
Observe and follow any warnings and instructions marked on the controller.
Danger symbols indicate a hazardous situation which, if not avoided, will result
in death or serious injury. This signal word is to be limited to the most extreme situations.
Warning symbols indicate a hazardous situation which, if not avoided, could
result in death or serious injury.
Caution symbols indicate a hazardous situation which, if not avoided, could
result in minor or moderate injury.
NOTICE:
Addresses practices not related to personal injury .
1.2 Related Documents
MASTERSuite User Manual (P/N: 020-100563-xx)
1.3 Safety Information
Review this section before attempting to service the TVC-1211 controller.
1.3.1 Prevent Electrostatic Discharge
Electrostatic discharge (ESD) can damage electronic components. ESD damage can shorten a component's life
expectancy or render it useless.
The following precautions can reduce the risk of ESD damage to components:
• Ground yourself properly when working with a static-sensitive component or assembly.
• If possible, work on a grounded surface.
• Keep electrostatic-sensitive components in their static-safe packaging until you are ready to install.
• Always avoid touching pins, leads or circuitry.