Christie TVC-1211, User Manual, Page: 41 / 46

Section 4: Specifications
TVC-1211 User Manual 4-7
020-100769-01 Rev. 4 (05-2012)
4.5 Input (Source Signal) Compatibility
4.5.1 Video Input (V16A)
16-Port Multiple Video Input Module (V16A)
• Card Format 32bit 66Mhz PCI adapter
• Card Size 105 mm (4.1”) x 310mm (12.2”)
• Max. Cards per Expansion Chassis 8
• Number of Capture Channels 16
• Max. Capture Resolution per Channel 720 x 288
• Supported Video Formats PAL, NTSC, SECAM in either Composite or S-Video
• Video Window Update Rate Real time: 25/30 fps (PAL/NTSC)
• Max. Power Consumption 23.73 watts
• Max. Power Requirements +12V @1.4A, +3.3V @ 2.1A
Composite and S-Video Input
• Signal Formats Composite-video (CVBS), S-video (Y/C)
• Video Standards
• NTSC M, NTSC J, NTSC N, NTSC 4.43 50/60, PAL I, PAL B, PAL D, PAL G, PAL H, PAL M, PAL N,
PAL NC, PAL4.43 60, SECAM B, SECAM D, SECAM G, SECAM K, SECAM L, SECAM L, SECAM
LD
• Input Levels Composite Video 1.0 Vp-p ± 3dB (including sync tip)
• S-Video Luma (Y) 1.0 Vp-p ± 3dB (including sync tip)
• S-Video Chroma (C) 630 mVp-p nominal (burst)
• Connector Type BNC
• DC Offset ±2V
• Nominal Impedance 75 ohms
• VS16 Bandwidth 60 MHz (-3dB)
• Crosstalk -80dB @ 20kHz (V16A)
4.5.2 Standard Input VGA Connectors (D2R2)
NOTES: 1)
Sync signals cannot be swapped between the horizontal/composite and vertical connectors.
2)
Sync signal(s) can be negative or positive polarity.
3)
Sync present on any of the RGB signals will be
ignored when separate or composite sync is input.
4)
Sync can be bi-level.
5)
‘No signal’ means no signal
should be applied to the input.
Signal Description Red Green Blue
Hor/
Comp
Vert
RGB with H&V Sync (5 wire) 1, 2, 3 Red Green Blue H-Sync V-Sync
RGB with composite sync (4 wire) 1, 2, 3, 4, 5 Red Green Blue Comp sync No signal
RGB with sync-on-green (3 wire) 4, 5 Red Green w/sync Blue No signal No signal