Christie TVC-1211, User Manual, Page: 31 / 46

Section 3: Connecting the Controller
TVC-1211 User Manual 3-11
020-100769-01 Rev. 4 (05-2012)
3.9 System Monitoring
The LEDs on the front and back panels provide information about the controller's status.
3.9.1 Monitoring Controller Components
As the system cycles through the components, the LEDs on the front panel will illuminate to indicate status.
NOTE:
The server can be remotely monitored through WallManager’s Administration>Status window.
Table 3.1 LED Status
Item Description Status
1 UID switch and LED Not supported by TVC-1211.
2 NIC2 link/activity LED (embedded NIC only) Green: Linked to network.
Flashing Green: Linked with activity on network.
OFF: No network connection.
3 NIC1 link/activity LED (embedded NIC only) Green: Linked to network.
Flashing Green: Linked with activity on network.
OFF: No network connection.
4 Power cap
Green: Power cap configured.
Flashing Amber: Power cap exceeded.
OFF: Server in STANDBY or power cap disabled.
5 Internal system health LED Green: Normal (System ON)
Amber: Degraded system health. Please contact Christie Technical Support.
Red: System health is critical. Please contact Christie Technical Support.
OFF: Normal (System OFF)
6 Power ON/Standby LED Amber: System has AC power and is in STANDBY mode.
Green: System has AC power and is powered up.
OFF: System has no AC power.