Installing the display
Secure Series II LCD Panels User Guide
28
020-001779-01 Rev. 1 (03-2021)
Copyright
©
2021 Christie Digital Systems USA, Inc. All rights reserved.
Purchase a certified HDMI cable. Otherwise, the picture may not display or a connection error may occur.
Follow these steps to turn on the power.
1.
Connect the power cable of the display into an outlet with AC 100-240V 50/60Hz.
2.
Turn on the main AC power switch.
3.
If the power indicator is green, the screen turns on automatically.
4.
If the power indicator is red not green, press the power key on the remote control or on the keypad to
turn on the power.
Christie recommends the following to prolong the life of the display:
•
Operate the display within its rated ambient environment
•
Operating temperature: 0 to 40°C (32 to 104°F)
•
Relative humidity: 80%, maximum.
•
Notice. If not avoided, the following could result in property damage.
•
Do not display static (non-moving) content on the display for long periods of time. This may
cause image “burn
-
in” or image retention, which is not covered under warranty
.
To avoid static content, do the following:
•
Display dynamic (moving) images whenever possible. Consider using a screen saver to avoid
displaying continuous static (fixed) video content.
•
Turn off the display when not in use.
Select the language used for the menus and on screen display.
1.
To go to the menu, press Menu.
2.
From the main menu, select OSD.
3.
Press Language
4.
Select the preferred language.
5.
Exit the menu.
