Network guide
Secure Series II LCD Panels User Guide
51
020-001779-01 Rev. 1 (03-2021)
Copyright
©
2021 Christie Digital Systems USA, Inc. All rights reserved.
2.
To set a value, click Apply.
3.
To display the current value, click Read.
1.
To upgrade the Ethernet or Scaler firmware, go to the General settings page.
•
Ethernet firmware update time: approximately 5 minutes
•
Scaler firmware update time: approximately 8 minutes
Caution! If not avoided, the following could result in minor or moderate injury.
•
Do not disconnect LAN cable or power off during F/W update
•
Wait until upgrade complete message show
To connect to Crestron by X-Panel program, use the X-Panel program. Follow the instructions below.
1.
Excute the X-Panel program.
2.
Click options > Settings.
3.
In the Gateway Settings dialog, set the IP address 192.168.10.10 (Monitor IP) and Port 41794.
4.
Control the monitor settings, for example, the Picture setting and remote control.
