Operation
Secure Series II LCD Panels User Guide
39
020-001779-01 Rev. 1 (03-2021)
Copyright
©
2021 Christie Digital Systems USA, Inc. All rights reserved.
1.
From the Setup menu, select Power Save > On.
After 40 seconds of no signal, the display enters the power-saving mode.
1.
From the Setup menu, select Power Off Mode.
2.
Determine how you want the display to go into Power Save Mode.
Power Off
Mode
IR
RS232
control
Ethernet
control
Crestron
control
Power
consumption
Standby
Yes
Yes
Yes
Yes
Under 5W
Sleep
Yes
Yes
No
No
Under 2W
Deep Sleep
Yes
No
No
No
Under 0.5W
When the Power Off Mode is set to sleep, do not enter sleep mode before the Mac address appears in
the About menu of the on-screen display. The Mac address display indicates all booting is complete.
Determine what type of interface is required.
1.
From the Setup menu, select the Interface Select.
2.
Select the control interface.
Valid values: RS232, OPS-RS232, and Off
